This used Trencher Vermeer T1255III can dig up to 70 CM deep and 350 CM wide. It is the most powerful Vermeer Trencher, with a 600HP , 2000 hours engine.
TOP-DOWN Cutting Technology: Allows the cutter teeth to achieve greater rock penetration. When the machine travels forward, the teeth on top of the drum are positioned over the top of the rock surface. As contact is made, the teeth instantly cut the rock.
TEC.PLUS: A microprocessor-based electronic control system which monitors operating conditions, and informs the operator of real-time machine performance for increased productivity and reduced wear to the machine. An electric stroke limiter increases engine control and reduces operator error from the most abusive aspect of trenching.
TILT: There’s no need to level the surface before trenching with the optional auto-tilt track. An oscillating track frame allows to follow the ground’s contour, ensuring a vertical trench on slopes, minimizing chain wear and trench cave-ins.
TL drum hours: only 200
Tractor hours: only 500
– Water dust system
– Laser with tracker jack system for level cutting (auto or manual)
– Complete remote system allowing the machine to be worked outside the cab
– Full set of new cutting tools
+- 5° auto tilt on the drum can be set on manual
Fully serviced by Vermeer Dealer at 500 hours:
– New hydraulic hoses
– Software update
– New lifting rams
2.000 hours warranty remains on Cat engine
Year of manufacture:
€ 1.800.000 ex works